The Voron Project recommends using Mainsail or Fluidd, although it is also possible to use Octoprint. Mainsail and Fluidd are both developed specifically for Klipper-based printers, …

The make command, when completed, creates a firmware file klipper.bin which is stored in the folder /home/pi/klipper/out. There are multiple options for getting this firmware file installed …

Right click and download this (klipper.uf2) file to your PC in order to flash the Skr Pico. Next, you will connect the Skr Pico to your PC using the USB-C connector, then push the reset button on …

Turn on the power supply to power on the SKR board (s). If named properly, the SKR will automatically update with the Klipper firmware. Important: If the SKR (s) are not powered with …

If named properly, the SKR will automatically update with the Klipper firmware. Important: If the Mini E3 is not powered with 12-24V, Klipper will be unable to communicate with the TMC …

These sections are where the controllers are defined and identified so that Klipper knows which components are connected (and to which controller if there is more than one).

Please select your printer model to start Voron V0 Voron V2 Voron V1/Trident Voron Switchwire

Thanks to Klipper’s flash-sdcard.sh script, this can be automated. In a nutshell, this script places the new firmware file on the card, restarts the board, waits for the new firmware to be flashed, …

Voron Design recommends using USB to control the Spider, which simply requires connecting a USB-A to USB-C cable between the Spider and Pi. If you prefer a UART connection, please …

Using the linux terminal & ssh Setting up klipper requires a bit of work to be done from the linux terminal. For some, this is trivial. For others, this is a completely new experience.